MAV MV150075 Maverick 1/10 EP RS MAVERICK PHANTOM XB 1/10 RTR BUGGY

MEGAMAVERICKRACING BUGGYACTION!

WITH THE MAVERICKPHANTOM XB

There’s a reason why Maverick by HPI is the ultimate goto brand both for newcomers starting out in their RC hobby and those more experienced drivers adding a third or fourth vehicle to their fleet! …It’s because we get that people want to race, jump, bash (and crash) and be confident that their new RC pride and joyis tested andbacked by HPI’s seal of quality. Meaning spectacular action at your fingertips. Simplycharge n’ go and keep coming back for more!

And with the MaverickPhantom XB you get a powerful 4WD racing buggywith enough speed to keep you on your toes, in a super easy to drive, awesome, fun package!

This RCbuggy is truly a great taster for the RC hobby!

IF IT’S ACTION YOU WANT –

The Phantom XB comes preloaded with the MM-550Brushed electric 550 high torque motor powering a tough shaft drivetrain spinning all 4 wheels for awesome 4WD action. While the waterproof ESC, water-resistant servo and gear cover mean the fun keeps coming and water or debris won’t stand in your way!

IT’S SO EASY AND FUN TO DRIVE!

To drive the Phantom XB, simply pick up the controller with your left hand, put your left index finger into the trigger area, and then put your right hand on the steering wheel its as natural as driving a real car! Turn the wheel to go left and right, and gently pull on the trigger with your left index finger to go forwards. To stop the car, gently push away from you with your left index finger – then release and push away again to go into reverse. It takes seconds to get used to this easy operation, and pretty soon you’ll be racing with your friends!

MIGHTY ENOUGH TO CAUSE TROUBLE – NIMBLE ENOUGH TO AVOID IT!

Mounted to the sturdy moulded tub chassis featuring optimized weight distribution, theHigh TorqueMS-06WR steering servo controls the steering through a dual-point bellcrank systemwith an independent servo saver to protect the servo against crash damage.

FEATURES:

• 4WD shaft drive Racing Buggy
• Brushed electric 550 high torque motor
• Waterproof ESC and water-resistant servo
• 2.4Ghz Maverick radio set with waterproof receiver
• USB Charger included (2A input recommended)
• 7.2V 1800mAh NiMh battery pack included
• Gear cover to keep debris away from the spur gear
• Differentials front and rear
• Ball Bearings throughout
• Independent double wishbone suspension
• Oil-filled shock absorbers
• Dual point bellcrank steering system
• Separate servo saver
• Pre-cut factory finished and decaled bodyshell
• Molded tub chassis with optimized weight distribution

Includes:

7.2V 1800mAh Ni-Mh battery stick pack
USB Battery Charger

Specification:
Length: 405mm
Width: 250mm
Height: 150mm
Wheelbase: 283mm
Weight: 1.5kg

Items Required:
4 x AA Batteries